Configuration Procedure Of Moguie - Ebyte E32-170T30D User Manual

ebhe Chengdu Ebyte Electronic Technology Co,Ltd E32-170T30D user manual
last packet of data is still in transmission.
Subpackage transmitting : the last package of data have been
written to the RFIC. When transmission is on, user can continue
to input 512 new bytes. (The buffer is actually empty.)
Timing Sequence Diagram of AUX when RXD pin receives
5.6.3 Configuration procedure of module
® Only happened when power-on resetting or exiting sleep mode
The self-check procedure
happens when the procedure
of power-on reset, instruction i
reset and exit mode 3. Mormal operation after self-check
Timing Sequence Diagram of AUX when self-check
5.6.4 Notes for AUX
No. Description
For function 1 & function 2 mentioned above, the priority should be given to the one with low level output,
1 which means if it meets each of any low level output condition, AUX outputs low level, if none of the low
level condition is met, AUX outputs high level.
When AUX outputs low level, it means the module is busy & cannot conduct operating mode checking.
Within 1ms since AUX outputs high level, the mode switch will be completed.
After switching to new operating mode, it will not work in the new mode immediately until AUX rising edge
lasts for 2ms . If AUX stays on the high level, the operating mode switch can be affected immediately.
Copyright ©2012-2019, Chengdu Ebyte Electronic Technology Co.,Ltd. 9