Smart Regeneration System Operating Condition; Smart Regeneration Level Settings - Hyundai IONIQ 6 2023 Owner's Manual

Driving Your Vehicle
B6002301
The smart regeneration system turns on
and the regenerative braking level is
displayed as 'AUTO'.
• Turning off the smart regeneration
system: While the smart regeneration
system is on, pull and hold the right
paddle shifter ( ) for over a second.
The instrument cluster displays the
regenerative braking level instead of
'AUTO', and the smart regeneration
system turns off.
• Using one pedal driving: While the
smart regeneration system is on, pull
and hold the left paddle shifter (
over 0.5 seconds (For more
information, refer to the "One Pedal
Driving" section in this chapter.)
i-PEDAL is not available while the smart
regeneration system is on. Turn off the
smart regeneration system first before
using i-PEDAL.
Smart Regeneration System
Operating Condition
When the regenerative braking level is
displayed as AUTO and the vehicle speed
is above 6 mph (10 km/h), the system
automatically controls the regenerative
braking level under the following
conditions:
• The road gradient changes
• Distance from the vehicle ahead
reduces or increases
6-18
• Speed of the vehicle ahead reduces or
increases
CAUTION
• When the forward safety warning light
is ON, the smart regeneration system
does not work properly. Depress the
brake pedal for deceleration.
• The function that adjusts the
regenerative braking intensity
depending on the road gradient is only
effective when the regenerative
braking level is 0. Braking intensity
does not significantly change
depending on the road gradient if the
regenerative braking level is 1 or above.
Smart Regeneration Level
Settings
) for
B6002501
The instrument cluster displays 'AUTO' (1)
when the smart regeneration system is
on. Depending on the conditions, the
system adjusts the regenerative braking
level (2). The indicator light (3) illuminates
when the vehicle recognizes a vehicle.
Smart regeneration default setting
The default braking level of the smart
regeneration system can be changed. Set
the default braking level to the lowest and
let the system adjust the braking intensity
automatically.
1 2
3