Hyundai IONIQ 6 2023 Owner's Manual page 31

Understanding the DC charging connector
The exterior of the DC charging cable is as follows:
B0001101
(1) DC charging connector (Vehicle side)
Charging with a DC charger
Follow the instructions below to charge the vehicle with a DC charger.
1. With the vehicle started, apply the Electronic Parking Brake (EPB) while pressing the
brake pedal.
2. Turn all switches off, shift to P (Park), and stop the vehicle.
3. With the vehicle door unlocked, press the open indicator on the charging door to open
the charging door.
4. Open the charging inlet cover and check the charging connector and charging inlet for
dust or other contaminants.
• If there is any dirt or contaminants, remove it using the air gun.
WARNING
Do not touch the interior of the charging connector of the charging cable or the
charging inlet on the vehicle.
5. Remove the charging connector protection cap of the DC charging cable, hold the
charging connector handle, and connect it to the DC charging inlet on the vehicle. Push
it until you hear a click.
• When charging starts, the estimated charging time will be displayed on the
instrument cluster for a minute.
Information
If you open the driver's door while charging, the estimated charging time will also be displayed
on the instrument cluster for a minute.
1
1-25