Using Electricity Inside The Vehicle - Hyundai IONIQ 6 2023 Owner's Manual

Hide thumbs Also See for IONIQ 6 2023:
Table of Contents

Advertisement

Information
• When the V2L connector is connected to the charging inlet of the vehicle, all doors and
connectors will be automatically locked to prevent theft and separation. To disconnect the V2L
connector, unlock the door and pull the connector with the open switch pressed.
• Before using the V2L function, deactivate the scheduled climate setting referring to the "Setting
Scheduled Charging and Climate". The V2L function may be cut off depending on the
scheduled climate setting.
• To check and change the V2L setting, refer to the "Setting a Battery Discharging Limit When
Using Vehicle to Load (V2L)".
• If an electric device that exceeds the maximum power capacity is connected, a warning message
appears on the instrument cluster and the power supply shuts off immediately.

Using Electricity Inside the Vehicle

You can connect home appliances or electric devices to the power outlet inside the
vehicle.
WARNING
Do not use an electric heating appliances like electric kettle, toaster, or iron in the vehicle.
It may cause a fire or injury.
1. Press the Start/Stop button to the ON position or activate the utility mode.
• For more information about the utility mode, refer to the "Setting Utility Mode"
section in this chapter.
2. Use the smart key to unlock the power outlet cover.
B0002501
1
1-49

Advertisement

Table of Contents
loading

Table of Contents