Wheel Clutch Replacement - Toro POWER MAX HD Service Manual

Traction Drive System Installation (Autoturn Models) (continued)

Wheel Clutch Replacement

Wheel Clutch Disassembly
POWER MAX® HD Service Manual
3424-820 Rev A
9. Tip machine backwards, off the auger housing.
10. Connect the shift linkage.
11. Put fuel into the machine.
1. Remove the 11–tooth gear from the intermediate shaft.
2. Slide the washer behind the 11–tooth gear off the shaft.
3. Remove the 32–tooth sprocket and the thrust washer from the shaft.
4. Remove the shift collar and flat washer from the shaft.
Figure 69
Figure 70
Page 9–15 Wheel Clutch Traction Drive System: Service and Repairs