Quick Stick® Replacement - Toro POWER MAX HD Service Manual

QUICK STICK® Replacement
QUICK STICK ® Removal
Controls: Service and Repairs
1. Park the machine on a level surface. Stop the engine, wait for all moving
parts to stop and remove the key.
2. Unhook the Z-bend and disconnect the deflector cable from the underside of
the Quick Stick.
3. On the underside of the control panel, remove the 2 screws holding the
Quick Stick cover in place.
4. Lift the front cover and pull forward to release the latch tabs on the rear.
Set the cover aside.
Figure 11
Figure 12
Page 5–6 POWER MAX® HD Service Manual
3424-820 Rev A