Toro POWER MAX HD Service Manual page 53

Auger Belt Removal (continued)
Auger Belt Installation
POWER MAX® HD Service Manual
3424-820 Rev A
5. Remove the fuel from the machine.
6. Remove the auger belt from the impeller pulley.
7. Tip the unit onto the front. Remove the bottom cover. Depress the auger
lever to allow brake to be released.
8. Pull the belt out of the bottom of the machine.
1. Using the auger lever, release the brake.
2. Install the belt through the bottom of the machine.
3. Install the auger belt onto the impeller pulley.
4. Install the Auger belt.
5. Install the bottom cover. Tip the unit into proper position.
Figure 37
Figure 38
Page 6–5 Belts: Service and Repairs