Optional Ocp Card; Removing The Ocp Filler - Dell PowerEdge C6620 Installation And Service Manual

Figure 89. Installing the rubber tube cover
Next steps
Follow the procedures listed in

Optional OCP card

Removing the OCP filler

Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3. Remove the expansion card riser
4. Remove the rubber tube cover. See
cover.
Steps
Hold and lift the OCP filler from the OCP slot on the chassis.
After working inside your
Safety instructions.
Before working inside your
1.
remove the liquid cooling cold plate with leak sensor
system.
system.
Installing and removing system components
step 1 to remove the rubber tube
113