Table of Contents
Advertisement
Table 28. Processor Settings details (continued)
Option
Dell Controlled Turbo Settings
Dell AVX Scaling Technology
Optimizer Mode
Number of Cores per Processor
Processor Core Speed
Processor Bus Speed
Local Machine Check Exception
Processor n
Table 29. Processor 1 details
Option
Family-Model-Stepping
Brand
Level 2 Cache
Level 3 Cache
Number of Cores
Maximum Memory Capacity
36
Pre-operating system management applications
Description
Controls the turbo engagement. Enable this option only when
System Profile is set to Performance or Custom, and CPU
Power Management is set to Performance. This item can be
selected for each system profile mode. This option is set to
Disabled by default.
NOTE:
Depending on the number of installed processors,
there might be up to two processor listings.
Enables you to configure the Dell AVX scaling technology. This
option is set to 0 by default. Enter the value from 0 to 12
bins. The value that is entered decreases the Dell AVX Scaling
Technology frequency when the Dell-controlled Turbo feature
is enabled.
Enables or disables the CPU performance. When this option
is set to Auto, set the CPU Power Management to Max
Performance. When set to Enabled, enables the CPU Power
Management settings. When set to Disabled, the CPU Power
Management option is disabled. This option is set to Auto by
default.
Controls the number of enabled cores in each processor. This
option is set to All by default.
Specifies the maximum core frequency of the processor.
Specifies the bus speed of the processor.
NOTE:
The processor bus speed option displays only
when both processors are installed.
Enables or disables the local machine check exception. This
is an extension of the MCA Recovery mechanism providing
the capability to deliver Uncorrected Recoverable (UCR)
Software Recoverable Action Required (SRAR) errors to
one or more specific logical processors threads receiving
previously poisoned or corrupted data. When enabled, the
UCR SRAR Machine Check Exception is delivered only to the
affected thread rather than broadcast to all threads in the
system. The feature supports operating system recovery for
cases of multiple recoverable faults that are detected close,
which would otherwise result in a fatal machine check event.
The feature is available only on Advanced RAS processors.
This option is set to Disabled by default.
NOTE:
Depending on the number of processors, there
might be up to n processors listed.
The following settings are displayed for each processor:
Description
Specifies the family, model, and stepping of the processor as
defined by Intel.
Specifies the brand name.
Specifies the total L2 cache.
Specifies the total L3 cache.
Specifies the number of cores per processor.
Specifies the maximum memory capacity per processor.
Advertisement
Table of Contents
