Lom Riser Card; Removing The Lom - Dell PowerEdge C6620 Installation And Service Manual

LOM riser card

Removing the LOM

Prerequisites
NOTE: Install an expansion card filler bracket over an empty expansion slot to maintain Federal Communications
Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the system and aid in proper
cooling and airflow inside the system.
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3. Remove the expansion card riser
Steps
1. Using Phillips 2 screwdriver, remove the screws that secure the LOM.
2. Lift the LOM card from the connector on the system board.
Figure 52. Removing the LOM
Next steps
Install the expansion card riser
82 Installing and removing system components
Safety instructions.
Before working inside your
1.
1.
system.