Installing The Sd Card Reader; Installing The Optional Ssd Card - Dell OptiPlex 7040-Small Form Factor Owner's Manual

Installing the SD card reader

Steps
1. Place the SD card reader on the chassis.
2. Tighten the screws that secure the SD card reader to the computer.
3. Route the power supply unit cables into the retention clips.
4. Install the:
a. power supply unit
b. optical drive
c. hard drive assembly
d. front bezel
e. cover
5. Follow the procedure in

Installing the optional SSD card

Steps
1. Remove the:
a. cover
b. front bezel
2. Peel the adhesive tape (blue) from the rubber.
22 Removing and installing components
After Working Inside Your Computer.