Table of Contents
Advertisement
Note
Single-mode fiber ports only support Ultra Physical Contact (UPC) cable connectors.
3.2
Configuring the Device
Once the device is installed and connected to the network, it must be configured.
All configuration management is done via the RUGGEDCOM RX1524 interface. For
more information about configuring the device, refer to the "RUGGEDCOM ROX
Configuration Manual" associated with the installed software release.
RUGGEDCOM RX1524
Installation Manual, 10/2021, C79000-G8976-1487-03
Device Management
3.2 Configuring the Device
23
Advertisement
Table of Contents
