Calibrating The Treadmill Distance; Recording An Ultra Run Activity; Swimming; Swim Terminology - Garmin MARQ CAPTAIN GEN 2 Owner's Manual

Calibrating the Treadmill Distance

To record more accurate distances for your treadmill runs, you can calibrate the treadmill distance after you run
at least 1.5 km (1 mi.) on a treadmill. If you use different treadmills, you can manually calibrate the treadmill
distance on each treadmill or after each run.
1 Start a treadmill activity
2 Run on the treadmill until your watch records at least 1.5 km (1 mi.).
3 After you finish the activity, press STOP to stop the activity timer.
4 Select an option:
• To calibrate the treadmill distance the first time, select Save.
The device prompts you to complete the treadmill calibration.
• To manually calibrate the treadmill distance after the first-time calibration, select Calibrate & Save > Yes.
5 Check the treadmill display for the distance traveled, and enter the distance on your watch.

Recording an Ultra Run Activity

1 From the watch face, press START.
2 Select Ultra Run.
3 Press START to start the activity timer.
4 Start running.
5 Press LAP to record a lap and start the rest timer.
NOTE: You can configure the Lap Key setting to record a lap and start the rest timer, start the rest timer only,
or record a lap only (Activities and App Settings,
6 When you are done resting, press LAP to resume running.
7 Press UP or DOWN to view additional data pages (optional).
8 After you complete your activity, press STOP, and select Save.

Swimming

The device is intended for surface swimming. Scuba diving with the device may damage the product and will
void the warranty.
NOTE: The watch has wrist-based heart rate enabled for swim activities. The watch is also compatible with
the HRM-Pro series, HRM-Swim
™
data are available, your watch uses the chest heart rate data.

Swim Terminology

Length: One trip down the pool.
Interval: One or more consecutive lengths. A new interval starts after a rest.
Stroke: A stroke is counted every time your arm wearing the watch completes a full cycle.
Swolf: Your swolf score is the sum of the time for one pool length and the number of strokes for that length.
For example, 30 seconds plus 15 strokes equals a swolf score of 45. For open water swimming, swolf is
calculated over 25 meters. Swolf is a measurement of swimming efficiency and, like golf, a lower score is
better.
Critical swim speed (CSS): Your CSS is the theoretical speed that you can maintain continuously without
exhaustion. You can use your CSS to guide your training pace and monitor your improvement.
16
(Starting an Activity, page 14).
page 37).
, and HRM-Tri accessories. If both wrist-based heart rate and chest heart rate
™ ™
NOTICE
Activities and Apps