Table of Contents
Advertisement
Changing Integrated QuickFit Accessories
1 Pull to open the latch, and remove the integrated QuickFit strap or bracelet from the watch.
2 Pull to open the latch on the integrated strap or bracelet, and align it with the watch.
3 Close the latch over the watch pin.
NOTE: Make sure the strap or bracelet is secure. There should be a small gap
strap or bracelet.
Device Care
Do not use a sharp object to clean the device.
Avoid chemical cleaners, solvents, and insect repellents that can damage plastic components and finishes.
Thoroughly rinse the device with fresh water after exposure to chlorine, salt water, sunscreen, cosmetics,
alcohol, or other harsh chemicals. Prolonged exposure to these substances can damage the case.
Avoid pressing the buttons under water.
Avoid extreme shock and harsh treatment, because it can degrade the life of the product.
Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause
permanent damage.
Device Information
NOTICE
between the latch and the
121
Advertisement
Table of Contents
