D-Sub 9 Pin Connector For Gpio (Auxiliary); Internal Dip Switch - JAI GigE BM-500GE User Manual

5.3. D-sub 9 pin connector for GPIO (Auxiliary)

Type: DD-09SSG
Fig. 5 D-sub 9 pin connector

5.4. Internal DIP switch

In order to change, the top cover must be removed.
SW601 For selection of OPT IN and
Iris Video OUT
Factory default is UP position(OPT IN).
To select an Iris video, these two
switches should be set at DOWN.
Left side, as seen from the
lens side
BM-500GE / BB-500GE
No I/O
1 I LVDS In1-
2 I LVDS In1+
3 I TTL IN 1
4 O TTL Out 1
5 GND
6 NC
7 NC
8 O TTL Out 2
9 GND
Right side, as seen from the
lens side
Fig.6 DIP swithces
12
Name
75ohm Terminator *1
SW600 For selection of TTL IN 1 75
ohm ON or OFF
Factory default is UP position ( 75 ohm
OFF). To set 75 ohm ON, these two
switches must be DOWN.
Note