⑥ Dc In/Trig Connector (6-Pin Round); ⑦ Mounting Holes (M3, 3Mm Depth) - JAI GO-5000M-PGE-1 User Manual

GO-5000M-PGE-1 | GO-5000M-PGE-UV-1 | User Manual (Ver. 1.0)
⑥ DC IN/TRIG Connector (6-Pin Round)
Connect the cable for a power supply (optional) or for DC IN / trigger IN here.
Note: Refer to the
⑦ Mounting Holes (M3, 3mm depth)
Use these holes when attaching an MP-43 tripod adapter plate (optional) or mounting the camera
directly to a wall or other structural system.
Camera Side: HR10A-7R-6PB (73) (Hirose Electric or equivalent)
Cable Side: HR10A-7P-6S (Plug) (Hirose Electric or equivalent)
Pin No. Input/Output
1 Power In
2 In
3 Out
4 Out
5
6 GND
Digital IN/OUT Interface
Signal
DC In
Opto In1
Opto Out 1
Opto Out 2
Opto Common
GND
topic as well.
- 15 -
Parts Identification
Description
DC +12V ~ +24V
GPIO 5
GPIO 1
GPIO 2