JAI GigE BM-500GE User Manual page 2

BB-500GE-S is specially designed to use with the external strobe light.
#7 and #8 pins on Hirose 12P connector are used for an optical output 1 in the standard
version but in the BB-500GE-S, they are used for the open collector output to interface with
the external strobe light.
Pin no.
*1: Iris Video output function can be set by the internal DIP
The following drawing shows the typical connection with the strobe light.
Except the mentioned subject, the BB-500GE-S is the same as the BB-500GE.
BM-500GE / BB-500GE
BB-500GE-S Supplement
1
2 +12 V DC input
3 Opt IN 2 (-) / GND (*1)
4 Opt IN 2 (+)/Iris Video out (*1)
5 Opt IN 1 ( - )
6 Opt IN 1 ( + )
7 Open Collector (-)
8 Open Collector (+)
9 Opt Out 2 ( - )
10 Opt Out 2 ( + )
11 + 12 V DC input
12
switch (SW601).
Signal
GND
GND
Fig. 1
2
Remarks
GPIO IN / OUT