Introduction Of Hardware Parameters And Design; Interface Introduction - Ebyte E810-DTU User Manual

Chengdu Ebyte Electronic Technology Co,.Ltd

1. Introduction of hardware parameters and design

2.1 Interface introduction

No. Item
1
VCC
2
GND
3
GNDA
4
B/TXD
5
A/RXD
6
PWR
7
WORK
8
LINK
9
INTERNET
Copyright ©2012–2020, Chengdu Ebyte Electronic Technology Co,.Ltd
DC power supply, it is recommended to use standard 12V or 24V
Ground
RS232 end for connecting GND of other RS232 device
External A / RS232 input of other RS485 devices, or TXD of other RS232 devices
External B / RS232 output of other RS485 devices, or RXD of other RS232 devices
Power indicator
UART TX and RX indicator
Indicator for building link remotely
RJ45 with network transformer
Description
E810-DTU User Manual
3