Dryers With Reversing Control Timer - Continental Girbau L36USS36G Owner's Manual

INSTRUCTIONS FOR
DRYERS WITH
REVERSING
CONTROL TIMER

Dryers with Reversing Control Timer

Instruction
In operation, coasting of basket increases, making it necessary to readjust
reversing timer.
CAUTION
Failure to do this will cause the thermal overload units for the basket to
cut-out unnecessarily and probably damage the gear reducer.
Adjustment of Reversing Timer Dwell Time
CAUTION
Dryer power supply must be shut off before adjusting timer.
The dwell time is the time from when the motor turns "off", to when it turns
"on" again in the opposite direction.
Turning the dwell adjustment knob counterclockwise increases the dwell time
and turning it clockwise decreases the dwell time.
Recommended dwell time for the basket to stop completely is 5 to 7 seconds.
Minimum basket stopping time is 4 seconds.
NOTE:
Select non-reversing or reversing before starting dryer.
NOTE:
Fan rotates counterclockwise as viewed from back end of motor. See
arrow on motor support.
Basket rotates counterclockwise as viewed from back end of motor. See
arrow on motor support.
Basket rotates counterclockwise as viewed from front of tumbler.
To change rotation of both fan and basket, reverse power leads L1 and L2.
To change rotation of fan only, reverse motor leads F1 and F2.
To change rotation of basket only, reverse motor leads B1 and B2.
Page 51