ELECTRICAL
CONNECTIONS
Grounding Instructions (Illustration)
grounding method must comply with local electrical code
requirements; or in the absence of local codes, with the National
Electrical Code as ANSI/NFPA 70 (Latest Edition).
See wiring diagram furnished with dryer. Your Continental Dryer
is completely wired at the factory and it is only necessary for the
electrician to connect the power leads to the wire connectors within
the service connection box on the rear of the dryer. Do not change
wiring without consulting factory as you may void the factory
warranty. Do not connect the dryer to any voltage or current
other than that specified on the dryer rating plate. (Wiring
diagram is located on rear wall of dryer.)
Page 16