Assigning waypoint
symbols
Entering waypoints
from the chart
screen
951/952 Operator's Manual Rev. B
names in the unit's memory. If you want, you can also enter a
description of up to 16 characters on the line below the name.
When creating or editing waypoints, you can assign a symbol
for the waypoint as a means of readily identifying it on the
CHART screen. You can choose from any one of 16 symbols,
eight of which are illustrated below.
ANCHOR
FUEL
To enter waypoints graphically:
1. Press the :$<3765287(6 key.
2. Press the :$<32,176 menu key. The unit now displays
the graphic WAYPTS CHART screen.
Chapter 6 - Creating Waypoints
FISH
FLAG
WRECK
DANGER
Figure 3: Waypoint symbols
X
DOT
Page 75