Chapter 6 - Creating Waypoints
Updating from the
chart screen
Updating from a
list screen
Page 88
the WAYPTS CHART screen or from any of the waypoint list
screens.
1. Select the waypoint on the CHART screen by positioning
the cursor over it so that the waypoint's name and coordi-
nates are displayed in the INFO BAR at the bottom.
2. Press the :$<3765287(6 key, the :$<32,176 menu
key, then the (',7 :$<37 menu key.
3. Press the 83'$7( &225' menu key.
4. Press the (17(5 key.
The unit updates the waypoint's coordinates to your exact
position at the instant you pressed the 83'$7( &225' menu
key.
1. Press the :$<3765287(6 key, then the :$<32,176
menu key.
2. Press the 1(;7 9,(: menu key to show the LOCAL
screen (in order of distance from your position). The way-
point you intend to update should be at or near the top of
this list.
3. If necessary, press the &85625 3$' to point to the
desired waypoint.
4. Press the (',7 menu key.
5. Press the 83'$7( &225' menu key.
951/952 Operator's Manual Rev. B