Chapter 8 - Understanding Waypoint/Route Navigation
Navigating to a stored waypoint
Steering to a waypoint
Page 118
If you prefer to select a waypoint from a list of previously
stored waypoints, rather than from the chart, first display it
using one of the three waypoint list screens.
1. Press the :$<3765287(6 key, then the :$<32,176
menu key.
2. Press the 1(;7 9,(: menu key to display the most con-
venient list (often the LOCAL list; see note below).
3. Press the &85625 3$' to point to the waypoint you
want to navigate to.
4. Press the *2 72 menu key, and then press the (17(5
key.
Since the waypoints you navigate to are usually nearby, the
point list is often the best list to use for finding the desired waypoint.
To display information to guide you directly to a waypoint
you've designated, press the 67((5 key. Two versions of the
steering screen are available to choose from, if you press the
67((5 key twice.
NOTE:
951/952 Operator's Manual Rev. B
LOCAL
way-