NorthStar 951X Operator's Manual page 123

Erasing an entire
route
Editing a route
you're following
951/952 Operator's Manual Rev. B
between the LOCAL and ALPHA lists, press the 1(;7
9,(: key.
3. Move the cursor to select the desired waypoint from the
displayed list, and press the (17(5 key. The selected way-
point is now in your route.
Removing waypoints from a route
1. On the EDIT ROUTE screen, press the &85625 3$' to
move the pointer onto the waypoint you want to remove.
2. Press the 5(029( menu key.
3. Press the (17(5 key (or the &/($5 key to cancel).
Before erasing an entire route, you must erase all of the route's
waypoints (see "Removing waypoints from a route" above).
Once you remove all the route's waypoints:
1. On the ROUTES screen, press the &85625 3$' to point
to the route you want to erase.
2. Press the (5$6( menu key. The unit prompts you with
the question box confirming that you want to erase that
particular route.
3. To erase the route, press the (17(5 key (or the &/($5
key to cancel).
If you make changes to a route you're currently navigating
along, remember that the modified route is stored in the unit's
memory, and these changes do not appear in the copy of the
route the unit is following. To make these changes take effect,
you must start following the route again (see "Navigating
along routes" starting on page 123).
Chapter 7 - Creating Routes
Page 113