Chapter 7 - Creating Routes
Page 108
3. If you've selected an existing waypoint, press the $''
:$<37 menu key; if you've selected only a cursor posi-
tion, press the $'' 1(: :3 menu key. Repeat this pro-
cess for each new waypoint you want to add to the front
of the route.
4. When you've finished adding waypoints to the front of
the route, press the &$1&(/ $'' menu key to select a
different editing mode, or press the 5(7851 menu key to
see the EDIT ROUTE screen again.
5. Press the 5(7851 menu key (or any function key) to
leave the EDIT ROUTE screen.
Adding waypoints to the middle of a route
To add waypoints to the middle of a route:
1. Move the cursor onto the leg of the route where you want
to insert a waypoint. The 63/,7 /(* menu key is dis-
played when you've placed the cursor on a leg of the
route.
2. Press 63/,7 /(* and move the cursor to the nav aid, way-
point, or unmarked point where you want to place the
new waypoint. Dotted lines representing the new legs to
and from the new waypoint are shown as you move the
cursor.
951/952 Operator's Manual Rev. B