Installation And Commissioning; General Remarks; Inbetriebnahme - Fronius TTG 1200 Operating Instructions Manual

Installation and commissioning

General remarks

The TIG welding torches are especially suitable for welding aluminium, CrNi and
steel, and stand out for their wide range of different versions.
The torches can be adapted to deal with a huge variety of different tasks, and do
sterling service in the field of manual series and one-off fabrication, as well as in
the workshop sector.
The JobMaster TIG is a TIG welding torch with JobMaster function. During wel-
ding the JobMaster-Function enables the parameters to be read off in an ergono-
mic manner and important parameters can be adjusted directly on the JobMas-
ter. Optimum control of the welding process is ensured without handling being li-
mited.

Inbetriebnahme

Vor jeder Inbetriebnahme kontrollieren
-
-
Während des Schweißbetriebes, Kühlmittel-Durchfluss in regelmäßigen
Abständen kontrollieren.
1
3
30
Dichtring am Anschluss Schweißbrenner
Kühlmittelstand
2
2
d
1
d
2
1
4
3
* JobMaster TIG Up/Down
°
3 0