Nortel Express Call Center Installation Manual page 42

System restart example
Enter jkl to force boot to BootROM vxWorks prompt
auto-booting...
boot device
unit number
processor number
file name
flags (f)
other (o)
Attaching to ATA disk device... Found device : Cirrus CL-PD672x
PC Card Detected: Socket 0
cisGet : pcCard recognized
PC Card Detected: Socket 1
cisGet : pcCard recognized
Loading /C:/exec...
/C:/ - Volume is OK
1803868 + 350000 + 563980
Starting at 0x1000...
Early serial debug initialized
Setting tLogTask priority to 250
Found device : Cirrus CL-PD672x
0x1affe64 (tRootTask): PC Card Detected: Socket 0
0x1affe64 (tRootTask): PC Card Detected: Socket 1
ipMethodInit, gIPMethod = 2
IP Address from NVRAM: 47.166.107.146
IP Data in NVRAM Valid, Boot Line updated
IP Address:47.166.107.146
Gateway Address:47.166.107.190
Subnet Mask::ffffffc0
Host Name: bootHost
Target Name: vxTarget
User: defuser
MAC Address for Port 0 is : 00:20:d8:d0:21:a8
SysConf: uEng_intConnect to pktHandlingIsr.
0 symbols bound.
Load uCode from buffer Status : Return Success
Starting Microengines.
42
: ata=
: 1
: 0
: /C:/exec
: 0x0
: ixpMac
Standard 2.0
Symposium Express Call Center