Nortel Express Call Center Installation Manual page 28

Media Card
This checks the present working directory. The directory should be the
drive in which you inserted the PCMCIA storage card. If it is not, type
cd "/A:", and then press Enter.
Note: You must type the double quotation marks.
8 In the MS-DOS window, at the ftp> prompt, type put <filename>.mms,
and then press Enter.
9 In the HyperTerminal session, at the ➝ prompt, type
upgradePCMCIA "/A:<filename>.mms" (where filename.mms is the new
loadware image file), and then press Enter.
Result: The upgrade file transfers to the PCMCIA drive. An example of the
filename is acd_login_1.08.mms.
Note: To determine which loadware file is currently installed, at the
prompt, type ll (two lowercase 'l' as in lima) to see a list of files in the
directory.
10 To end the ftp session, in the MS-DOS window type bye, and then press
Enter.
11 To restart the card, in the HyperTerminal session at the ➝ prompt, type
sysReboot, and then press Enter.
12 Choose Call ➝ Disconnect to end the HyperTerminal session.
28
Standard 2.0
Symposium Express Call Center
➝