Ballard Designs Salerno MA275 Quick Start Manual

Glass door cabinet

PRODUCT NAME: Salerno Glass Door Cabinet

ITEM NUMBER: MA275

DIMENSIONS OF ITEM ASSEMBLED: 85"H X 49 1/2"W X 19"D

PRODUCTS ARE NOT INTENDED

FOR COMMERCIAL USE.

UPDATED: 11-2-2020

Prevent accidentally discarding small parts or

hardware. Retain all carton contents until assembly

and installation are complete.

Customer Service: 800-367-2810

Online: www.ballarddesigns.com

MADE IN CHINA

Page 1 of 4

Table of Contents

Need help?

Do you have a question about the Salerno MA275 and is the answer not in the manual?

Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Salerno Glass Door Cabinet ITEM NUMBER: MA275 DIMENSIONS OF ITEM ASSEMBLED: 85”H X 49 1/2”W X 19”D Prevent accidentally discarding small parts or hardware. Retain all carton contents until assembly and installation are complete. PRODUCTS ARE NOT INTENDED MADE IN CHINA FOR COMMERCIAL USE.
Page 2 Assemble in location for intended use. REQUIRED TOOLS: Phillips and Flathead Screwdrivers Hardware Located Here (A-C) -Two person assembly suggested. Shelves (D) Remove all parts, hardware and protective packaging from carton and carefully arrange on a clean, level, padded surface. WARNING Tip-Over Hazard ANCHORING HARDWARE INCLUDED...
Page 3 Assemble in location for intended use. STEP 1: Determine location for each Shelf (D) then insert Shelf Supports (A) into corresponding pre-drilled holes. Lay Shelf level upon Supports. LEVELERS: Cabinet is equipped with Rotary Levelers under each corner, accessible from INSIDE Cabinet.
Page 4 WALL ANCHORING HARDWARE (ANTI-TIP) Ltr. Qty. Hardware Included Large Screw Small Screw WARNING Tip-Over Hazard Bracket Serious or fatal crushing injuries can occur from a furniture tip-over Prevent tipping accidents. Anchor your furniture. Retention Belt Installation: 1. Place furniture against wall at desired location then locate and mark a Wall Stud behind unit. 2.