Related Manuals for Ballard Designs Tuscan MA166
Summary of Contents for Ballard Designs Tuscan MA166
- Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Tuscan Media Console ITEM NUMBER: MA166 ASSEMBLED DIMENSIONS: 34”H x 52 1/2”W X 20”D PRODUCTS ARE NOT INTENDED IMPORTED FOR COMMERCIAL USE. UPDATED: 6-13-2019 Page 1 of 4...
- Page 2 Shelves (E) Hardware located here (A-C) Ltr. Qty. Hardware Included TOOLS NEEDED: -Assembly may require 2 people. Shelf Supports -May require a Flathead screwdriver. -Requires a Phillips head screwdriver. NOTE: To avoid accidentally Wood Plugs discarding small parts or hardware, retail all carton contents until assembly and installation Anti Tip Kits...
- Page 3 STEP 1: Insert Shelf Supports (A) into desired locations inside Console (D). Gently place Shelves (E) onto Shelf Supports. STEP 2: If necessary, Console may be leveled by adjusting the interior Rotary Levelers located on bottom of each corner. To access, open doors and using a Flathead Screwdriver, turn clockwise or counterclockwise until the Console is level.
- Page 4 ANTI TIP INSTALLATION: PART C Ltr. Qty. Hardware Included Small Screws Large Screws Brackets Retention Belts Attach 2 Brackets (C) to back of Console with Small Screws (A) placed through smaller hole. Attach remaining Brackets (C) INTO A WALL STUD with Large Screws (B) 2 inches below the Brackets attached to Console.
Need help?
Do you have a question about the Tuscan MA166 and is the answer not in the manual?
Questions and answers