Download Print this page

Troubleshooting - BRP 912 Series Operator's Manual

Rotax engine

Advertisement

3.6) Troubleshooting

Starting problems
Engine run
Page 3-6
Ed.4/January 01 2023
Non-compliance can result in serious injuries or death!
Only qualified staff (authorized by the Aviation Authorities) trained
on this particular engine, is allowed to carry out maintenance and re-
If the following hints regarding remedy do not solve the prob-
lem, contact an authorized distributor. The engine must not be
operated until the problem is rectified.
All checks in accordance with the Maintenance Manual ,
current issue.
Engine does not start
Possible cause
Ignition OFF
Closed fuel valve or clogged
filter.
No fuel in tank.
Starting speed too low,
faulty or discharged battery.
Starting speed too low, start
problems on cold engine.
Wrong fuel (Jetfuel or
Diesel).
Engine keeps running while ignition switch is turned off
Possible cause
Overheating of engine.
BRP-Rotax
m WARNING
pair work.
NOTICE
Remedy
Switch ON
Open valve, clean or renew filter,
check fuel system for leaks.
Refuel.
Fit fully charged battery.
Use top quality, low friction oil; allow
for sufficient cooling period to coun-
ter for performance drop on hot start-
er; preheat engine.
Change of fuel.
Remedy
Let engine cool down at idling at ap-
prox. 2000 rpm.
Effectivity: 912 Series
Rev. 1

Advertisement

loading

This manual is also suitable for:

Om-912899700