Nortel Attendant PC Quick Start Manual page 57

Speed Call
Speed Call codes
SPRE codes
Stored number redial
Supervisory mode
System Speed Call Controller
Through-dialing
A dialing feature available on a programmable feature key that
enables you to dial any number stored by the Speed Call
Controller. As an alternative you can enter the Speed Call SPRE
code, and then enter the code assigned to the desired number.
A feature available on a programmable feature key that uses a
code to dial a programmed number automatically. The Speed Call
Controller assigns codes to the list of telephone numbers for
dialing by the Speed Call feature key.
Special PREfix code, one to four digits long, that is assigned by
your system administrator. You use the code to operate a feature
for which your console has no dedicated (programmed) feature
key.
Pressing the correct flexible feature key allows a number to be
stored after it has been dialed, either before or during the
connection, for later automatic dialing.
Selecting the Make Set Busy key when your set is idle enables you
to monitor other attendants, call an attendant, transfer a call to
another attendant, and receive a call from another attendant.
A flexible feature key that can overcome restrictions on individual
telephones via programming so that the users can call out to s
specific set of numbers, such as for emergencies (ambulance, fire
department, 911) or to a company out-of-area branch office, etc.
Extension or tie-line users may request access to a number which
requires use of a trunk which they are not allowed to access.
Access the trunk for the user. Then the user can then dial out
(except onto fully restricted trunks).
List of Terms
Meridian 1 Attendant PC Software Quick Start
Page 49 of 54