Parkside PDRD A1 - Pneumatic Tyre Inflator Manual

Introduction

Congratulations! You have chosen high-quality device by our company. Familiarise yourself with the product before using it for the first time. In addition, please carefully refer to the operating instructions and the safety advice below. Initial operation of this tool must be performed by trained personnel. Keep these instructions in a safe place. If you pass the device on to anyone else, please ensure that you also pass on all the documentation.

The following pictograms are used in these operating instructions / on the equipment:
	Please read the operating instructions!		Never point the device at people or animals.
	Observe the warning and safety instructions!		Keep children away from the device!
	Wear ear protection, dust mask, safety glasses and protective gloves.		Dispose of packaging and device in an environmentally-friendly way!
	Direct current

Intended use

With suitable accessories the pneumatic tyre inflator can be used to pump up and regulate the air pressure in bicycle tyres, inflatable dinghies, air beds, balls, etc. This article is not to be used contrary to the stipulated conditions of intended use detailed in the instruction leaflet. The manufacturer accepts no responsibility for damage or injury resulting from non-observance of the instructions or from any form of misuse. This device has been designed for household use and may not be used for commercial or industrial purposes.

Features

1. Pressure gauge
2. FUNC. Button
3. On / Off button
4. Pneumatic tyre inflator
5. Air outlet button
6. Compressed air nozzle
7. Tube with valve plug
8. Trigger
9. Battery compartment cover
10. Battery compartment

Scope of delivery

1 Digital pneumatic tyre inflator

1 Set of operating instructions

Technical Data

Operating pressure: max. 6.2 bar

Rated voltage range: 3 V

Compressed air quality: Cleansed, oil-free and free of condensation

Volume flow: Standard flow: 100–300 l / min.

Sound pressure level: 86 dB (A)

Acoustic capacity: 98 dB (A)

Measured value Corresponds to: EN ISO 14462

The display is powered by 2 LR 03 AAA 1.5 V batteries that are stored behind the display (approx. 3 years operational durabilty). Should the display fade or work incorrectly, please replace the batteries.

Safety information

Basic safety measures must be followed when using compressed air devices to eliminate the risk of fire, electric shock and personal injury. Be sure to read and follow the notices within these operating instructions prior to using the equipment and store them in a safe location. The manufacturer assumes no liability for damages or personal injury resulting from failure to follow these operating instructions.

• Children or persons who lack the knowledge or experience to use the device or whose physical, sensory or intellectual capacities are limited must never be allowed to use the device without supervision or instruction by a person responsible for their safety. Please ensure that children cannot play with this unit.
• 
  Check the unit after filling with compressed air using a tested pressure gauge.
• 
  EXPLOSION HAZARD!
  
  Use this device in well-ventilated areas only. Never use petrol or other flammable liquids to clean the air tool! Sparks could ignite residual vapours inside the compressed air equipment resulting in the compressed air equipment exploding.
• 
  RECOIL! When used under high pressure conditions, recoil can occur which can cause danger due to constant pressurisation.
• 
  RISK OF INJURY! Never point the air jet towards yourself or other people, animals, or electrical equipment.
• During maintenance, switch off the compressed air supply.
• Never exceed the maximum permitted operating pressure of 6.2 bar. Use a pressure reducer to adjust the operating pressure.
• Switch the device off if you do not use it anymore.
• First of all, disconnect the tube from the compressed air source and when you have done this, disconnect the supply pipe from the unit. Following these instructions will stop the supply pipe from twirling around all over the place.
• For your own protection, please wear suitable protective clothing.
• Keep children and other persons away from the equipment during use.
• Do not use the equipment when tired or under the influence of drugs, alcohol or medications. One moment of carelessness when using the equipment may result in serious injuries. Distractions can cause you to lose control of the device.
• Before any repair and maintenance work or transport, remove the device from the compressed air source.
• Before using the unit, check it for damage, and especially for light damage or damage to the protective systems. These must be thoroughly checked to confirm that they are indeed completely capable of performing their intended tasks. All unit parts must be correctly assembled and comply with all guidelines in order to ensure correct and safe operation.
• If you ascertain that the unit is indeed damaged, you are not permitted to use it. Do not bend the unit's pipe. This could cause damage.
• 
  Please observe all manufacturer's instructions regarding inflatable articles.
• Never remove model numbers. They are safety-relevant parts of the unit. If you have no experience of working with this unit, please undertake a training course to acquaint you with the dangers of embarking on such a venture.

Original Accessories / Auxiliary equipment

• Use only the accessories and attachments detailed in the operating instructions. Using other types of additional parts can cause danger.

Start-up

Before first use

• Remove the battery compartment lid on the rear.
• Replace with battery type LR 03 AAA 1.5 V. Check the polarity of the batteries.
• Close the battery compartment by replacing the battery compartment lid

Connecting the compressed air source

Never exceed the maximum permitted operating pressure of 6.2 bar.

In order to regulate the pressure, the compressed air source must be fitted with a pressure regulator.

• Connect the unit to a suitablecompressed air source. Now connect the supply pipe using the quick-release connector to the coupling plug on the pneumatic tyre inflator.

Using the pneumatic tyre inflator

• Connect the unit to a compressed air supply and press the On / Off switch on the pneumatic tyre inflator display . The unit is now activated.
• Press the trigger to start the air flow. Release the trigger to stop the air flow. The air pressure can be read off the pressure gauge .
• Using the FUNC button you can switch between the various measuring units (PSI, bar, kPa, Kgf,/cm 2 ).
• If you have inflated too much air into the article: Press the air release button to release some of the air.
• Press the lever down on the valve plug and pull off the valve cap from the valve.
• Disconnect the unit from the compressed air source after finishing the work.

First of all, disconnect the tube from the compressor and when you have done this, disconnect the supply pipe from the unit. Following these instructions will stop the supply pipe from twirling around all over the place.

Changing the batteries

• Remove the battery compartment lid on the rear.
• Remove the used batteries.
• Replace with battery type LR 03 AAA 1.5 V. Check the polarity of the batteries.
• Close the battery compartment by replacing the battery compartment lid

Maintenance and Cleaning

DANGER OF INJURY! The device requires no maintenance.

• Do not use corrosive or aggressive cleaning agents. Do not allow any liquids to enter the device. Otherwise the device could be damaged.
• Clean the casing with a dry cloth.

Service

Only allow your unit to be maintained and serviced by qualified service personnel. This will maintain the safety features of your unit.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Parkside PDRD A1 - Pneumatic Tyre Inflator Manual