Changing The Login / Password Settings; Systems Settings Tab; System Gateway; Rear Panel Control Ip Address - D2D FLEX 3000 Setup Manual

D2D Technologies
5. Changing the login / password
settings
On the top righthand side of the screen, click on the "Admin"
Then click on Account Settings
Rename the login (If desired)
Retype in the password (admin)
Create a new password. letters, numbers and _-.,! only, case sensitive. 2
to 50 characters
NOTE: If you lock yourself out (IE: forget the login or passwords) contact D2 Care for "backdoor
access" to reset the unit.

6. Systems Settings Tab

1. System Gateway

Set this to the gateway of the LAN that allows the Flex 3000 to access external addresses.

2. Rear Panel Control IP Address

The IP address of the card for the Ethernet control plugged into the back of the unit.

3. Routes

Parameters for the IP route. Add static routes for access to addresses that are not available through the
configured Gateway.
8
FLEX 3000 V5.2-2301