Unreferenced Pids; Pass-Through Matrix; Inserting And Multiplexing Asi - D2D FLEX 3000 Setup Manual

D2D Technologies

2. Unreferenced PIDS

This will insert PIDS from another source into a particular stream. Most commonly used for SCTE
triggers and Emergency Alert or WARN systems that need to pass or insert a PID that is not associated
with another program.

3. Pass-Through Matrix

This mode will merely pass all the data through from a selected input to a selected output without any
packet processing. Most commonly used for ASI to TSoIP/SRT conversions.
Leave this mode off you need to rebrand, add or change the stream in any way.
This example shows the ASI source out is directly coming in from the IP 1 In. And the IP 1 Out Source is
coming directly out of the ASI In.

4. Inserting and multiplexing ASI

Once a valid ASI stream is inserted into the backplane, it should show up on the status of the screen for
the appropriate ASI.
On the Transport Streams Page, you can click on the plus sign, expand it and drag any of the services (or
all) to any output. In this case, one service is being sent out to the ASI 1 Out.
13
FLEX 3000 V5.2-2301