Table of Contents
Advertisement
D2D Technologies
1. D2 FLEX 3000 and 3500 Backplane:
A. Power: Supplied by 5VDC 3.6 amp external power supply provided with unit. Redundant power
supply optional.
B. HDMI Port: Currently not used.
C. Ethernet Gigabit Data Port: Used for configuring the FLEX 3000 via the D2Manage web server and
sending/receiving Transport Streams over IP with UDP or SRT
D. ASI RX: Inputs for receiving ASI Transport Streams into the unit.
E. ASI TX: Output for sending ASI Transport Streams away from the unit.
2. D2 FLEX 3000 / 3500 Features
1. Base Model
The 3000 will simply send out whatever it receives in with no other functions available. All
ASI programs in, get immediately sent to the IP Output. ALL IP in, will get sent to the ASI
Output. All other menu items are erroneous.
To find out what features are enabled. Navigate to the
If you need to add any features, they can be added with a software upgrade. Contact your
distributer or
D2D Technologies
1. BASE Model - Flex 3000:
The D2 FLEX 3000 comes standard with ASI to IP and IP to ASI conversion that allows
the transmission of SRT. (Secure Reliable Transport). SRT is an open source video
transport protocol and technology stack that optimizes streaming performance across
unpredictable networks.
2. D2 FLEX 3500 Upgrade:
The 3500 Upgrade feature offers the ability to manipulate the VCT (Virtual Channel
Tables), add or delete static PSIP. Change short names and major / minor channel
numbers as well as add or delete minor channels. It will also allow you to send out the
Transport Stream on both IP and ASI. Once upgraded, you can add the following
features:
3. D2 GUIDE - Dynamic PSIP, EPG insertion feature:
for a quote.
4
FLEX 3000 V5.2-2301
Features
Page.
Advertisement
Table of Contents
