D2D Technologies
3. Host Name: Is the IP address of the
FLEX.
4. Contact
credentials.
5. Navigate to the "sch" Directory found
in the root/d2flex directory. If there is
no sch directory, create one. NOTE:
Lower case only.
6. Move (or copy) the .txt file you
created in Excel.
7. Reset the unit, wait a few minutes and
see if any PSIP is passing through.
8. The log should show if there is ETT
and EIT tables being generated.
D2D support
for login
27
FLEX 3000 V5.2-2301