Connecting To The Unit Via The Serial Port And Ip Address Discovery - D2D FLEX 3000 Setup Manual

D2D Technologies
12. Connecting to the unit via the Serial
Port and IP address Discovery
If you cannot connect via IP or the unit has quit responding completely, you may
be able to communicate with it via a serial connection:
Move the card to a port that has ample space to the right side of it so you can
reach in and plug in a mini USB into the USM_UART port closest to the SD drive.
Use a terminal program such as TerraTerm to access it via serial protocols via
115200, 8n N,1.
NOTE that a terminal program may need a third-party USB to UART Bridge VCP driver to function. You can
download that driver here:
drivers
Please contact D2D support
login credentials
Type "ifconfig". That will give you the IP
address of the M&C
https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-
for the
35
FLEX 3000 V5.2-2301