Adding Epg Tables Manually With A Spreadsheet; Building And Formatting The Spreadsheet - D2D FLEX 3000 Setup Manual

D2D Technologies
3. Select PSIP – Passthrough an select ASI 1.

1. Adding EPG tables manually with a spreadsheet:

1. Click on the gear icon on the appropriate output.
2. That will bring you to the Edit Stream ASI (x) (OUT 1) menu.
3. Set your FCC issued TSID → THIS IS IMPORTANT!
4. Leave the Version Number at 0.
5. Set tables to ATSC.
6. Set the PSIP mode to Automated.
7. No need to set any credentials.
8. Set your Egress rate to 19392000.
9. Click Save.

1. Building and formatting the spreadsheet

Plan on designing your EPG / PSIP file with the following formats:
•
air_date(YYYYMMDD) Or, 0 – 7 (See #1 below).
•
air_time(HHMM) IN UTC time.
•
duration(HHMM).
•
Event ID.
•
Event Title (EIT).
•
Event Description (ETT).
•
Entire Audience.
25
FLEX 3000 V5.2-2301