Transport Streams, Vct And Static Psip; Muxing, Manipulating And Adding Programs - D2D FLEX 3000 Setup Manual

D2D Technologies
Diagnostic Package: If you experience issues with the unit, a stream or anything else Flex related,
please click on the box, download the package and have it ready to email to support at
d2care@d2dtechnologies.com.
Configuration save and restore: This feature allows you to save a configuration and restore one.
These configurations are interchangeable between Flex 3000's but not any other Flex. Also,
recognize that if you upgrade firmware, some of the configurations could be changed or relocated.
Please refer to the Diagnostic tab help icons for more information.
Restore: This is where you upload and apply the saved configuration from this unit or from another
Flex 3000. This allows a master configuration to be easily applied to multiple units.
NTP Status Check: Verify NTP Status' to display the current NTP status and sync statistics.

3. Transport Streams, VCT and static PSIP

5. Muxing, Manipulating and Adding
Programs
On the "Transport Streams" menu, click on "Rescan" and let it scan, Once it has rescanned, click on the
"plus sign" (+) next to the ASI In, you should see some programs show up.
Drag and drop the services to the desired output.
NOTE: If you need an entire stream to go to an output, you can just drag the whole input over instead
of one at a time.
22
FLEX 3000 V5.2-2301