Firmware Tab - D2D FLEX 3000 Setup Manual

D2D Technologies
FLEX 3000 V5.2-2301
This option does not send the selected program to the IP output, only to the thumbnail display on the
Status tab.
12.

Firmware Tab

This page lists all the firmware, build dates and FPGA data.
Update firmware on this page via the box on the bottom that says "Upload Firmware". Simply browse to it
and upload it. The unit will prompt you for a restart. You will need to press yes, and the unit will restart.
NOTE: THIS WILL CAUSE A
SIGNIFIGANT OUTPUT INTERRUPTION
WHILE THE UNIT REBOOTS.
Expect about a 10 to 60 second cycle. You shouldn't
lose any settings or data when the new code is
applied. However, new features with new code could
have some things added, misplaced or changed that
may affect the output.
For the latest released firmware version, go to:
https://d2dtechnologies.com/support/.
19