R E - Branding The Services And Channels . Static Psip Or Vct; Modifying The Elementary Streams - D2D FLEX 3000 Setup Manual

D2D Technologies
FLEX 3000 V5.2-2301
6. Re-branding the services and channels.
Static PSIP or VCT
Click on the "Gear" icon of the ASI OUT (Not the individual outs) to make changes to the overall output
From here, you can manipulate the names and numbers.
You can modify elementary PIDS from the "Modify Elementary Streams" button
Be sure to hit save when you're done.

7. Modifying the Elementary Streams

On the bottom half of the Edit Outputs pages is the table of Elementary Streams. Below that is the
"Modify Elementary Stream button".
NOTE: All PIDS are in Hexadecimal.
23