Filtering The List; Using The Nortel Wlan Location Engine 2340 Dashboard; Installing Wlan Location Engine Dashboard On Windows Systems - Nortel 2340 Configuration Manual

56 Nortel WLAN Location Engine 2340 Dashboard
ESSID that each device is broadcasting (if available); if the report indicates 'Closed Network' for a particular device, it
means the ESSID is not being broadcast.

Filtering the list

There are four filtering controls (lists) at the top of the tab as follows:
• Locale: display the devices only for the specified locale (grayed-out when the Device List was generated for a
single Locale)
• Network: display the devices only for the specified network (grayed-out when the Device List was generated for a
single Network)
• All/Active/Inactive Devices: display all devices/active devices only/inactive devices only
• Label/MAC: display the devices whose Label/MAC contains the specified alpha-numeric string
For more information on Creating the layout, see the chapter 'Creating the layout'.
Using the Nortel WLAN Location Engine 2340
Dashboard

Installing WLAN Location Engine Dashboard on windows systems

1
Insert the WLE2340 CD in the CD-ROM drive. Locate the dashboard directory and choose the
sub-directory for the OS, where the Dashboard has to be installed (Windows). The Introduction wizard
appears.
NN47250-504 (324122-A Version 01.01)