Alternative Call Routing For Network Bandwidth Management; Contents; Description; Nn43001-307 02.02 Standard - Nortel 1000 Configuration Manual

Alternative Call Routing for Network
Bandwidth Management

Contents

This section contains information on the following topics:
•
•
•
•
•
•
•
•
•

Description

Alternative Call Routing for Network Bandwidth Management (NBWM) is
available for CS 1000 Release 4.5 and CS 1000 Release 5.0 .
Alternative Call Routing for Network Bandwidth Management (NBWM)
allows a station-to-station call (that is, a call that does not use a trunk)
between a branch office and main office to overflow to traditional routes.
Overflow can occur if there is insufficient interzone bandwidth available
to carry the call or if the Quality of Service (QoS) has degraded to
unacceptable levels. The feature also applies to station-to-station calls
from one branch office to another branch office, provided both stations are
registered to the same main office.
Figure 65 "Example of Alternative Call Routing for NBWM in operation"
(page 160)
Routing for NBWM can be used. It illustrates the sequence of events that
are explained in the information following the diagram.
Copyright © 2005-2007, Nortel Networks
.
"Description" (page 159)
"Operating parameters" (page 174)
"Feature interactions" (page 175)
"Feature packaging" (page 176)
"Feature implementation using Command Line Interface" (page 176)
"Feature implementation using Element Manager" (page 178)
"Diagnostics" (page 180)
"Maintenance" (page 184)
"Feature operation" (page 187)
shows a diagram of a typical network where Alternative Call
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50

NN43001-307 02.02 Standard

Release 5.0 3 December 2007
159