Nortel 1000 Configuration Manual page 199

LD 86
Prompt Response
REQ NEW CHG
CUST xx
FEAT DGT
... ...
DMI 1- 999
LD 86 Configure the system to trap the ESDN and reprocess it locally
Prompt Response
REQ NEW CHG
xx
CUST
FEAT RLB
... ...
RLI xxx
ENTR xxx
LTER YES
DMI 1 - 999
Copyright © 2005-2007, Nortel Networks
.
Description
Add, Change
Customer number as defined in LD 15
Digit Manipulation
...
Digit Manipulation Table numbers.
Do not use Digit Manipulation Table 0, as it results in the
incorrect call termination treatment.
b. Configure the system to trap the ESDN within the AC1 and AC2
translation tables to reprocess the ESDN locally.
Description
Add, Change
Customer number as defined in LD 15
Route List Block
...
Route List Index to be accessed
Entry number for NARS/BARS Route List
Local Termination entry. This allows the AC + ESDN call to be
recognized as an Emergency Services Access call.
Digit Manipulation Table.
Use the table configured in LD 86. This allows the digits after
the AC to remain in the call register as a called number.
Do not use Digit Manipulation Table 0, as it results in the
incorrect call termination treatment.
c. Configure Emergency Service Access call recognition for AC +
ESDN dialing in LD 90.
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Emergency Services Access 199
ATTENTION
ATTENTION