Cisco Catalyst 9200 Series Hardware Installation Manual page 72

Mounting the Switch on a DIN Rail
Procedure
Step 1
Place the DIN rail mount on the DIN rail, making sure that the top of the DIN rail mount clip hooks over the
top of the DIN rail.
Step 2
Sliding the release tab downwards, hook the clip on to the rail and release the tab until the rail mount clip
locks into place with a click.
Figure 35: Attaching the DIN Rail Mount to the DIN Rail
1
2
Step 3 Place the switch on to the DIN rail mount and secure it using the two 10-32 Phillips pan-head screws.
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
64
DIN rail mount
DIN rail
Note Note that the DIN rail is not
part of the DIN Rail Mount kit.
3 Release tab
- -
Installing a Compact Switch