Fan Led; Uplink Port Leds - Cisco Catalyst 9200 Series Hardware Installation Manual

Fan LED

Color
Green

Fan LED

Table 31: Fan LED Indicator
Color/State
Off
Green
Amber
Red

Uplink Port LEDs

The uplink ports have various status LEDs. Each port LED is labeled according to its module status.
• For SFP ports, a G labeling nomenclature is used, where G = 1 Gigabit. The The G label appears to the
• For SFP+ ports, a 10G labeling nomenclature is used, where 10G = 10 Gigabit. The 10G label appears
• For SFP28 ports, a 25G labeling nomenclature is used, where 25G = 25 Gigabit. The The G label appears
• For QSFP+ ports, a 40G labeling nomenclature is used, where 40G = 40 Gigabit. The The G label appears
Figure 66: SFP+ Port LEDs
Color
Off
Green
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
116
Description
The fan is not receiving power; the fans have stopped.
All fans are operating normally.
One or more fans have encountered tachometer faults.
One or more fans' tachometer faults have exceeded the maximum limit.
left of the uplink port LED.
to the left of the uplink port LED. SFP+ module ports support both SFP+ and SFP modules
to the left of the uplink port LED.
to the left of the uplink port LED.
Network Module Link Status
Link is off.
Link is on; no activity.
RJ-45 Console Port Status
RJ-45 console is enabled. USB console is disabled.
Switch LEDs