Cisco Catalyst 9200 Series Hardware Installation Manual page 96

Installing a Power Supply Unit
Power Supply Modules Overview
All the switches ship with a blank cover in the second power supply slot if the switches are ordered with only
one power supply module.
For information about available PoE and PoE+ requirements, see these sections the Power Supply Modules,
on page 11.
The power supply modules are autoranging units that support input voltages between 100 and 240 VAC. Each
AC power supply module has a power cord for connection to an AC power outlet. The modules use an 18-AWG
power cord.
The following illustrations show the power supply modules.
Figure 56: 1000W AC Power Supply
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
88