Dimensions When Separating Control Panel - Toshiba TCR Series Instruction Manual

TRANSPORTATION & INSTALLATION MANUAL
3.3.5

Dimensions when Separating Control Panel

Fig. 3.7 shows the connections of the control panel and dummy panel. Provide a
clearance of about 50.6 mm on the rear side of the separated control panel.
When the cable is connected to the dummy panel of the controller, provide a clearance
of 80 mm or so in front of the controller as the cable connector sticks out of the panel
surface.
80mm
50.6mm
Fig. 3.7 Cable connections of dummy panel and control panel
STE 80897
– 3–12 –