4.3
Separating Control Panel from Controller
4.3.1
Removing Control Panel
Remove the control panel in the following manner.
a)
Loosen the four (4) screws at the four (4) corners, which secure the control panel.
b)
Remove these screws, then carefully draw out the control panel toward your side.
Caution: Be careful of the cable connected on the rear side.
4.3.2
Cable between Controller and Control Panel
The cable required to connect the control panel and controller when they are installed
separately can be provided optionally.
TRANSPORTATION AND INSTALLATION MANUAL
Fig. 4.5 Removing control panel
– 41 –
STE 85320